Page 6
ECS-3M
DESCRIPTION CONTINUED...
The second stage provides control over a second variable
speed fan to help the first fan when higher room temperatures
require increased airflow. This second stage is also fully
programmable for settings, such as minimum speed, relative
set point, etc.
The third stage controls either a heater for colder climates, or
a third fan where additional cooling is required.
The ECS-3M provides you with full control over all three
stages via the use of an easy to follow display panel. All
programmable features can be customized to meet your
requirements. The ECS-3M keeps you constantly informed by
displaying the status of all of its outputs as well as the room
temperature. With an optional humidity probe, the ECS-3M
displays current humidity levels.
Safety of livestock is ensured by the continuous control of
climate and timely alarm notification, should environmental
conditions exceed alarm set points. Further security may be
obtained by connecting all ECS controls in a network
configuration to a computer via the use of an optional RCM-
40 remote monitoring unit . This provides remote control
monitoring of each room. All control panel variable outputs
are fused, and all programmable settings are maintained,
whether the ECS-3M is powered or not.
The ECS-3M provides an automatic constant temperature
reduction (ramping) feature for your maturing livestock. A
built-in low temperature safety factor prevents temperatures
from reaching dangerous limits.
With an ECS-3M in control of your climate, you are assured of
optimal living conditions for your livestock.
To Next Page
Loading...
