Page 9
CHAPTER 2 - INSTALLATION
Chapter 2 describes the installation of the ECS-3M
control panel.
2.1 UNPACKING
Unpack the ECS-3M and inspect contents for damage.
Should the contents appear to be damaged, contact
your local distributor for return procedures.
The package should contain the following standard
items:
•
1 ECS-3M control.
• 1 installed temperature probe (model number 2004-
1K).
•
3 cable fasteners or fuses.
• 1 Instruction manual.
The following optional items may be added:
• 3 additional temperature probes for temperature
averaging,
•
1 humidity probe. The ECS-3M requires the RHT-1
humidity probe for maximum accuracy of monitoring
and control of humidity levels.
The manufacturer recommends that the following
instructions be adhered to as closely as possible,
and that all work be performed by a certified
electrician. Failure to do so may void the warranty!
To Next Page
Loading...
