VAT 612 Series - Page 101

Series 612 MAINTENANCE
605262EE Edition 2018-08-20 101/
116
7.2.3.1 Required tools
• Pozidriv screw driver size 1
• Open end wrench 4.5mm
Description
Required tool
1. Remove panel screws
Pozidriv screw driver
size 1
2. Remove female screw locks from
SENSOR and POWER connectors
Open end wrench 4.5mm
3. Loosen and remove the LOGIC
connector screw
Open end wrench 10mm
4. Disconnect fan cable from motor driver
board