VAT 612 Series - Page 43

Series 612 INSTALLATION
605262EE Edition 2018-08-20 43/
116
7. EtherCAT mailbox timeout values (optional)
These timeout values are necessary for the EtherCAT mailbox transfer (Parameter data).
Settings:
The mailbox timing values are normally set by default.
These values must just be modified if a more optimized behaviour is necessary. These default values are
set in the ESI-file from VAT.
If the timing must be optimized do it as described in the following procedure.
1. Go to “Advanced Settings”
2. Modify the default settings values.