Vatech A9 Installation Manual

5. Installing the Equipment: Wall Mount
72 vatech A9 (Model:PHT-30CSS) Installation Manual
3. Place the equipment over the Alignment Plate to insert each Anchor Bolt into a
corresponding hole on the Column Bottom.
4. Place the washers and nuts on Anchor Bolts. Tighten each nut loosely with a
fastener.
 DO NOT tighten the nuts until the leveling is completed.
 While one installer tightens the nuts, the other installers
should hold the middle handle to prevent the equipment
from falling.

Vatech A9 Specifications

General

Brand	Vatech
Model	A9
Category	Medical Equipment
Language	English