Vathin DVM-D1 - Disposal; Technical Specification; Standard Applied; Specification

45
and disinfection procedures described in Chapter 7 must be followed. Vathin Medical reserves the
right to return contaminated medical equipment to the sender.
8.4. Disposal
At the end of product life, clean and disinfect the Digital Video Monitor.
Before disposing of the Digital Video Monitor, it is advised to follow these steps to erase all data:
• Log in as Administrator.
• Delete all files stored in the digital video monitor from the Archive - Select all folders and press
the bin .
• Delete Wi-Fi network and password though the Settings – Setup – Network setup menu.
• Delete DICOM network via the Settings – Setup – DICOM setup menu.
• Delete all Advanced Users from the Settings – User profiles menu.
• Then, dispose of the digital video monitor in accordance with local guidelines for electrical and
electronic waste.
9. Technical Specification
9.1. Standard Applied
The Vathin
®
Digital Video Monitor meets the following standards:
- IEC 60601-1 Medical electrical equipment Part 1: General requirements for basic safety and
essential performance
- IEC 60601-1-2 Medical Electrical Equipment Part 1-2 General requirements for basic safety and
essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests
9.2. Specification
Item
Specifications
Menu Functions
White balance
Manual
Data record
Videos (MP4)/photos (png)
Memory
64G memory
Language setting
English/中文简体
Time setting
Manual/Internet-based self-calibration
Monitor
15.6"; 1920 ×1080; touchscreen
Video output mode
HDMI, SDI