Vathin DVM-D1 - Image Parameter Adjustment

28
Note:
 Please complete the DICOM setting first and test the network link successfully before transferring DICOM
files.
 Only DICOM format can be used for export to PACS server. See table below for more information about
file formats.
 Always check if the entered patient data is correct before exporting to PACS.
 Protected Health Information (PHI) will be saved on the local storage of the digital video monitor until the
files are deleted, either manually or with auto delete function. Notice access to PHI requires logging in.
 Always use a secure network when exporting files from the digital video monitor.
 A stable network connection (Wi-Fi or LAN) is required when exporting photos and videos to a PACS
server. If a network error occurs while exporting, the export will be cancelled.
 You can choose to export files to a USB flash drive instead or wait until the connection has reestablished
before exporting to the PACS server.
Note:
 It is recommended to perform regular backup of the digital video monitor by exporting files to a PACS
server or USB flash drive. Protected Health Information (PHI) is stored with password protection in the
digital video monitor's memory and is not deleted from the digital video monitor by exporting files. To
delete PHI from the digital video monitor, the files must be deleted from the digital video monitor, either
manually or using the auto-delete function.
 Transferring imagery requires that the digital video monitor is connected to the network via Wi-Fi or
LAN/Ethernet cable.
6.5. Image Parameter Adjustment
6.5.1 Image parameter adjustment
Tap the icon to enter the image parameter adjustment menu to adjust image parameters such as
red saturation, green saturation, blue saturation, gamma, contrast, brightness and sharpness.