The device uses a WPA_Supplicant to support
WPA2 Wireless communication as TKIP and CCMP.
The authentication and integrity of the
communication is provided by the underlying
FIPS 140-2 compliant chipset wireless driver. Wi-Fi
option supports WPA2 Enterprise for mschapv2.
IEEE 802.3
IEEE 802.3ab
IEEE 802.3az
PICMG3.1
The device uses a standard Gigabit Ethernet
controller supporting a 1000base-T interface.
Network adaptor
configuration
Static IP address (IPv4) is configurable in the GUI.
Static IP address (IPv4)
is configurable in the
GUI.
The device does not support re-routing traffic
from Wi-Fi to LAN or vice versa, therefore the
device cannot act as a NAT (Network Address
Translation) gateway.
To support a broad range of network
infrastructures and PACS servers.Supports TLS encrypted
transmission
Note: By default, there is no open port, only the corresponding set port is opened for communication in
dicom transmission, network printing, or NTP timing function, and the port is closed after the function is used.
Appendix 3.2 Data at rest and in transit
The digital video monitor uses system memory to store information about scope, process, and network
configuration. The memory file system cannot be accessed directly from the GUI, and the file system is divided
by permissions, and the GUI can only access a fixed storage path, and the images and videos in the storage
path can be exported to the PACS server and/or USB storage devices.log file can exported to USB storage
devices.
The following exportable data are stored:
Images and videos can be transferred to a PACS server. The following formats and protocols are used during
the transfer from the displaying unit to the PACS server:
When the image or video is transmitted to PACS, the system automatically converts the stored image file into
dcm format for transmission, and automatically deletes the dcm file after the transmission is completed
Item Format Protocols Comments:
To Next Page
Loading...
