Settings PLRF10C/15C-2.0en
31
Declination setting / correction
Click the azimuth key three
times in rapid succession.
"dEcL" appears briefly followed
by the current setting.
L
Click on azimuth key to
change between
increasing (0,1,2,...) and
decreasing (0,-1,-2,...)
Short click on distance key:
•the declination value
changes by one unit per
click.
Hold down distance key
(>0.5s):
•the declination value
changes continuously
Click the azimuth key three
times in rapid succession to
store the new declination value.
The setting is not changed
when "OldC" is displayed.
3x
3x
To Next Page
Loading...
Need help?
General
