Veeder-Root TLS

TLS Magnetostrictive Probes International Installation Guide Probe Riser Pipe Installation
18
PROBE SPACER ASSEMBLY
See Figure 17 for example probe sleeve/adapter assembly instructions.
Figure 17. Example Probe Canister Sleeve/Adapter Assembly
Probe
canister
Up
Probe shaft
Settings for 3" Riser
Settings for 4" Riser
Fit adapters
at each end of
the canister.
Make sure
locking tabs
snap into
grooves in
canister.
Sleeve Assembly - 2” Riser
123
4
Adapter Assembly - 3” & 4” Risers