5.3.3 Software Upgrade Procedure – Delta Version
1. Open the Software Upgrade tab.
Smaller Delta Update package is often made available between consecutive versions (e.g. from 1.2.5 to 1.2.6) for
easier and faster field firmware update
2. Attach the DC charger to the test set.
3. Confirm IP connection (IP address).
4. Check the new software version box.
5. Tap on the Download button.
1. Wait until the download process finishes.
2. The install package is in internal memory.
3. Turn the test set OFF.
6. Power the test set ON.
7. The test set software is now up-to-date.
Go back to TOC
TX300s_Platform_Manual_RevB00
To Next Page
Loading...
