Vega VEGAPULS 64 - Supplement; 11.1 Technical data - Materials and weights

71
11 Supplement
VEGAPULS 64 • Two-wire 4 … 20 mA/HART
51141-EN-210219
11 Supplement
11.1 Technical data
Note for approved instruments
The technical data in the respective safety instructions which are included in delivery are valid for
approvedinstruments(e.g.withExapproval).Thesedatacandierfromthedatalistedherein,for
example regarding the process conditions or the voltage supply.
All approval documents can be downloaded from our homepage.
Materials and weights
Materials, wetted parts
Plastic horn antenna
Ʋ Adapterange PP-GF30 black
Ʋ Seal,adapterange FKM (COG VI500), EPDM (COG AP310)
Ʋ Focussing lense PP
Thread with integrated antenna
Ʋ Processtting 316L
Ʋ Antenna PEEK
Ʋ Seal, antenna system FKM, FFKM
Ʋ Process seal Klingersil C-4400
Flange with encapsulated antenna system
Ʋ Flange plating, antenna encapsulation PTFE
Hygienicttingwithencapsulatedantennasystem
Ʋ Hygienic antenna encapsulation PTFE
Ʋ Surface roughness of the antenna
encapsulation
R
a
< 0.8 µm
Ʋ Additional process seal with certain
hygienicttings
FKM-FDA,EPDM-FDA,Kalrez6230
Rinsing connection
Ʋ Flushing ring PP-GFK
Ʋ O-ring seal, rinsing connection FKM (SHS FPM 70C3 GLT), EPDM (COG AP310)
Ʋ Reuxvalve 316 Ti
Ʋ Sealing,reuxvalve FKM (SHS FPM 70C3 GLT), EPDM (COG AP310)
Materials, non-wetted parts
Mounting parts
Ʋ Antenna cone with plastic horn
antenna
PBT-GF 30
Ʋ Compressionange PP-GF30 black
Ʋ Mounting strap 316L
Ʋ Fixing screws, mounting strap 316L
Ʋ Fixingscrews,adapterange 304