7.5 Mounting the hinges 141
8 Aileron142
8.1 Preparation for Spar assembly142
8.2 Initial assembly of the lower half 143
8.3 Gluing Preparation 143
8.4 Preparation for the aileron control arm 144
8.5 Installation of top coating 145
8.5.1
Gluing the top coating 145
8.6 Closing of the external face 146
8.7 Assembly of the Aileron Components 147
8.8 Balance 147
9 Rudder 148
9.1 Rigid point on spar 148
9.2 Assembly of the right side 149
9.3 Final gluing of half of the right side150
9.4 Fitting Test 151
9.5 Rudder actuation arm 151
9.6 Final closing – Gluing 152
9.6.1
Front lamination of the spar 152
9.7 Balancing 154
To Next Page
Loading...