Veloce 400 - Table of Contents

Summary
1 General Information 1
2 Getting Started 3
3 Wing 4
3.1 Wing mounting template 4
3.2 Wing top coating preparation 5
3.3 Rear spar preparation 7
3.4 Experimental Fit 7
3.5 Main spar 8
3.6 Fuel Tank Preparation 8
3.6.1 Fuel output 10
3.6.2 Fuel vent lines 11
3.6.3 Tank breather 11
3.6.4 Anti-slosh valve 12
3.6.5 Fuel sensor 12
3.7 Fuel cap 13
3.8 Tank bridge 14
3.9 Rigid point for aileron horn 15
3.10 Bonding of the top coat 15
3.11 Tank closing lamination 16
3.12 Fuel Test 18
3.13 Static pitot lines18
3.14 Electrical conduit 18
3.15 Undercoating preparation 19
3.15.1 Fuel drain valve19
3.15.2 Aileron horn inspection panel 20
3.15.3 Suggested pitot tube fabrication 20
3.15.4 Undercoating lamination 21
3.15.5 Aileron's inspection panel cover fixation 21