VEMAG HP30E - Page 5

HP25E / HP30E Index
iii© VEMAG 2018
Working with the automatic separation valve 6-46
6.6.4.38 Separation valve 6-46
6.6.4.39 Separation interval 6-46
6.6.4.40 Valve o󰀨set 6-46
6.6.4.41 Separation valve open 6-47
6.6.4.42 Separation valve closed 6-47
Working with the minced meat line and forming machine 6-48
6.6.4.43 Weight groups 6-48
6.6.4.44 Group position 6-48
6.6.4.45 Group portions 6-49
6.6.4.46 Group pause 6-49
6.6.4.47 Belt control (analog output 1) 6-50
6.6.4.48 Belt control (analog output 2) 6-50
Working with the scale 6-51
6.6.4.49 Number of samples (VEMAG Scale 877) 6-51
6.6.4.50 Sample interval (VEMAG Waage 877) 6-51
6.6.4.51 Tendency control (e.g. Process Check) 6-51
Working with special devices 6-52
6.6.4.52 Casing pusher 6-52
6.6.4.53 Pushback 6-52
6.6.4.54 Type of special control 6-53
6.6.4.55 Portion delay 6-53
6.6.4.56 Knife (cutter) 6-54
6.6.4.57 Maximum lling pressure (pressure monitoring
on grinding system) 6-54
6.6.4.58 Maximum temperature (temperature monitoring
for the grinding system) 6-55
6.6.4.59 Hopper mode 6-55
6.6.4.60 Hopper vacuum 6-56
6.6.4.61 Hopper level 6-56
6.6.4.62 Hopper level (optional) 6-57
6.6.4.63 Speed limit 6-58
6.6.4.64 External portioning 6-58
6.7 Congurations (operating mode settings) 6-61
6.8 Service 6-63
6.8.1 Service pages 6-63
6.9 Messages 6-64
6.9.1 List of messages 6-64
7 Cleaning 7-1
7.1 General information 7-1
7.2 Removing parts to be cleaned 7-1
7.2.1 Filling horn and lling horn holder 7-1
7.2.2 Linking horn (optional) 7-2
7.2.3 Linking gear (optional) 7-2
7.2.4 Double screws 7-3
7.2.5 Double screw housing 7-3
7.2.6 Hopper 7-6
7.2.7 Scraper 7-7
7.2.8 Vacuum system 7-8
7.3 Cleaning the machine 7-10
7.4 Cleaning schedule 7-11
7.4.1 General recommendations 7-11
7.4.2 Chlorine-free, alkaline cleaning 7-11
7.4.3 Chlorinated, alkaline cleaning 7-11
7.4.4 Recommended cleaning agents and disinfectants 7-12
7.4.5 Foam cleaning 7-13
7.4.6 Special cleaners for the machine interior 7-15
7.5 Lubrication and assembly 7-16
7.5.1 Hopper 7-16
8. Maintenance 8-1
8.1 General information 8-1
8.2 Grease gun 8-5
8.3 First-time maintenance work 8-6
8.4 Maintenance schedule 8-7