3.1.1 Starting - selecting the transaction type
3.1.1.1 Starting the transaction on the main screen (default transaction)
The application allows setting a so-called default transaction, i.e. the most common transaction, on the main
screen. This enables the amount to be entered immediately without selecting the transaction from the
list. The type of the default transaction can be different depending on the settings used by the Provider.
The Sales transaction is the standard default transaction.
If the default transaction is set, its name and the amount entry field is visible on the main screen. If the default
transaction is not set, only the “WITAMY” (eng. “WELCOME”) message is visible on the main screen.
FIGURE 5 STARTING THE TRANSACTION – THE DEFAULT TRANSACTION
3.1.1.2 Selecting the transaction from the menu list
The list of transactions that can be carried out on the terminal is available in the transaction menu under the
MORE button.
This list can be different depending on e.g. the sales network or point-of-sale profile.
In order to select the type of transaction from the list:.
FIGURE 6 STARTING THE TRANSACTION – SELECTING FROM THE MENU LIST
In case of mistake in selection, in order to end (cancel) the transaction, press the red CANCEL key, the
application returns to the main screen.
When the type of transaction is confirmed, the application switches to the amount entry screen.
of the transaction in the menu OR press its F1-F3 function
key on the side of the screen. The application shows the
amount entry screen of the selected transaction.
To Next Page
Loading...
Need help?
General
