VeriFone VX 520 - Replacing the Paper Roll; 2 Activation of Application, Main Screen, Icons; Activating the Payment Application

ITCARD • Planet Cash • Planet Pay • Planet Plus
7
Replacing the paper roll
Use standard paper for thermal printers in rolls with a width of 58 mm and length of 25 m.
In order to replace the paper roll:
FIGURE
3 REPLACING THE PAPER ROLL
2. Activation of application, main screen, icons
2.1 Activating the payment application
The payment application is activated on the terminal automatically when the device is turned on [see:
Connecting the terminal to the power source
. After the activation the main screen displays the following:
• Icons: CTLS, GPRS coverage/Ethernet connection
• Sales network name (in this case: Planet Pay; depends on the configuration)
• Default transaction amount entry field
• ADMIN and MORE menu buttons
• Time set currently on the terminal
Depending on the settings the view of the main screen in various locations may vary. In the standard
setup the main screen includes the Sales transaction amount entry field.
F
IGURE 4 APPLICATION’S MAIN SCREEN
1. Pull gently the printer cover upwards, then backwards
2. Remove the remains of the previous roll and paper from the printer chamber
3. Unwind the new paper roll approx. 10 cm and place it in the printer chamber
4. Close the printer cover and tear off a protruding piece of paper