Verint Nextiva S2750e Series User Manual

2: Mounting and Configuring the IP Camera
14 Verint Video Intelligence Solutions
6. Ensure that the Discovery IP Address is 255.255.255.255; otherwise, click Reset to
Broadcast.
7. Click OK.
8. In the New settings have been applied window, click OK.
9. Select the Units tab, then click Discover.
A device of type “Unknown” with a 169.254.X.Y IP address appears in the list; it
corresponds to your new device.
10. Select the unknown device, then click Configure. In the Reconfigure unit?
confirmation window, click Yes.
The New Network Configuration window appears.
11. Click OK.
The device reboots with its new network configuration.
12. In the Units tab, click Discover.
The new S2750e device appears.
The S2750e initial configuration is now complete. You perform further configuration with
the web interface (see page 19) or a video management software from Verint.

Verint Nextiva S2750e Series Specifications

General

Brand	Verint
Model	Nextiva S2750e Series
Category	Security Camera
Language	English