SECURITY
LOG
• Default policy – a packet has been accepted/blocked according
to the default policy.
• Defragmentation failed – the fragment has been stored in
memory and blocked until all fragments have arrived and
defragmentation can be performed.
• DHCP request – your Fios Router sent a DHCP request (depends
on the distribution).
• DHCP response - your Fios Router sent a DHCP response
(depends on the distribution).
• Echo/Chargen/Quote/Snork protection – a packet has been
blocked due to Echo/Chargen/Quote/Snork protection.
• Firewall internal – from the firewall internal mechanism, event
type is recorded and an accompanying explanation will be added.
• Firewall rules were changed – the rule set has been modified.
• Firewall status changed – the firewall status changed from up to
down or vice versa, as specified in the event type description.
• First packet in connection is not a SYN packet – a packet has
been blocked due to a TCP connection that started without a
SYN packet.
• Fragmented packet – a fragment has been rejected.
• Fragmented packet, bad align – a packet has been blocked
because, after defragmentation, the packet was badly aligned.
• Fragmented packet, header too big – a packet has been blocked
because, after defragmentation, the header was too big.