80
verizon.com/fios | ©2016 Verizon. All Rights Reserved.
/ USING NETWORK
CONNECTIONS
• End IP Address – Enter the last IP address in the IP
range that the Fios Router will automatically stop the
IP address allocation at. The maximum end IP address
range that can be entered is 192.168.1.254.
2. If Windows Internet Naming Service (WINS) is being used,
enter the WINS server address.
3. In the Lease Time in Minutes field, enter the amount of
time a network device is allowed to connect to the Fios
Router with its currently issued dynamic IP address.
4. Click Apply to save changes.
ROUTING
You can configure your Fios Router to use static or dynamic routing.
• Static routing – specifies a fixed routing path to neighboring
destinations based on predetermined metrics.
• Dynamic routing – automatically adjusts how packets travel on
the network. The path determination is based on network/device
reachability and status of network being traveled.
To configure routing:
1. In the Routing Table section, click Add New Route to
display and modify the new route configuration page.
To Next Page
Loading...
Need help?
General
