EasyManua.ls Logo

Vertical summit 800 - Walking COS (Class of Service)

Vertical summit 800
440 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
100
2.30.4 Walking COS (Class of Service)
Description
You may temporarily override the toll restriction of a Station to make outside toll calls from a
normally toll restricted Station. You must input an Authorization Code in order to activate Walking
COS (Class of Service) and are subject to the assigned COS (Class of Service) of the
Authorization Code. The COS (Class of Service) associated with the Authorization Code is
applied for the next call.
Operation
iPECS IP & LDP Phones
To activate Walking COS (Class of Service)
1. Press the [TRANS/PGM] button.
2. Dial “23”, the Walking COS (Class of Service) code.
3. Dial the Station number and Authorization code, “*” and System Authorization code or “*”,
the code index and System Authorization code.
4. Place your call as normal.
SLT
To activate Walking COS (Class of Service)
1. Momentarily press the hook-switch.
2. Dial “561”, the SLT Programming code.
3. Dial “23”, the Walking COS (Class of Service) code.
4. Dial the Station number and Authorization code, “*” and System Authorization code or “*”,
the code index and System Authorization code.
5. Place your call as normal.
Conditions
1. The Station COS (Class of Service) applied for Walking COS (Class of Service) is the
COS (Class of Service) of the Station associated with the Authorization code or, for a
System Authorization code, COS1.
2. Walking COS (Class of Service) applies the COS (Class of Service) for only one call.
Terminating the call returns the station to the assigned Station COS (Class of Service).
The user may reactivate Walking COS (Class of Service) to place another call or use
Flash to maintain the Walking COS (Class of Service).
3. Use of Authorization codes varies based on the Country Code assigned in the system
database. In some regions, particularly the US and UK, a System Authorization code
may be required for DISA access. Entering a Station code on a DISA line will fail in
these areas. In other regions, a System Authorization code can be used with Walking
COS (Class of Service).

Table of Contents

Related product manuals