Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
169
2.48 IP Bridge Mode
Description
UCS client Soft phones can automatically bridge the audio for a call to a “linked pair” Station.
When the Soft phone places a call in the bridged mode, the audio for the call can delivered to the
iPECS IP or LDP Phone by simply lifting handset or pressing the [SPEAKER] button.
Operation
iPECS IP & LDP Phones
To use the IP Bridge mode:
1. Place a call from Soft phone. The Soft phone must be in the Bridged mode.
2. Lift the handset of the linked iPECS IP or LDP Phone to receive audio.
Conditions
1. The Soft phone must be used local to the bridged iPECS IP or LDP Phone.
2. Bridged operation must be selected at the Soft phone.
3. The Soft phone must be linked to the associated iPECS IP or LDP Phone.
4. Bridging is not available from the iPECS IP or Phone to the Soft phone.
Programming
Web Admin.
To Next Page
Loading...
