Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
402
6.9 DSS/BLF Consoles
Description
The system allows an unlimited number of standard DSS/BLF Consoles to be installed in the
system. Up to three (3) standard DSS Consoles may be associated with a station connected to
an Summit. Each button on the console can be assigned as an outside Line, DSS/BLF or feature
button.
For ease of programming, each console is assigned to a button “map” in the system database.
The Administrator or user may then change individual Flex buttons as desired. Operation of the
DSS/BLF Console Flex buttons is the same as Flex buttons on the iPECS IP and LDP Phones.
Operation
Conditions
1. Each DSS Console is assigned to operate in connection with a specific station.
2. There is no limit to the number of DSS Consoles in a system beyond the basic system
capacities. The DSS Console employs a station number in the system.
3. Assignments for the DSS button maps are detailed in the Summit Admin &
Programming manual. Note that the individual button assignments can be changed as
with the iPECS IP and LDP Phone Flex buttons.
To Next Page
Loading...
