Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
49
2.9 Automatic Pause Insertion
Description
The system will automatically pause when dialing a Speed Dial number to allow for potential
connection delays. The pause will be inserted when any of the following occur:
After a Flash is encountered in a Speed Dial number,
After a PABX access code is encountered in a Speed Dial or redial number,
After a Pulse to Tone Switchover is encountered in a Speed Dial or Redial number.
When a connect message is received on an ISDN Line.
Operation
System
The system automatically pauses dialing after an appropriate event.
Conditions
1. An automatically inserted pause is not counted as a digit in a Speed Dial number.
2. The LCD of an iPECS IP or LDP Phone will show a "P" when a pause is encountered.
This indication is not shown if the system inserts the Pause automatically.
Programming
Keyset Admin.
Related Features
Station Speed Dial
System Speed Dial
Auto Called Number Redial (ACNR)
LNR (Last Number Redial)
Dial Pulse to Tone Switchover
Hardware
To Next Page
Loading...
