Vertical summit 800 - Station Flexible Buttons

Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
374
5.23 Station Flexible Buttons
Description
The iPECS IP and LDP Phones incorporate a field of “Flex” buttons as well as the fixed feature
buttons. The Flex buttons are assigned in the system database to access features, functions and
resources of the system. Specifically, Flex buttons can be assigned as:
 An Empty button has no system database assignment.
 A {DSS/BLF} button places One-touch ICM call to a designated station and
display status of the station.
 A Flex Numbering Plan button activates the feature associated with the
assigned digits from the Flexible Numbering Plan.
 A Speed Dial bin button accesses and dials the number from the assigned
Speed Dial bin.
 A Pool button accesses an outside Line from the Line group designated for
outgoing calls. A Pool button is used primarily to provide an outgoing call
appearance when a direct Line appearance is not available. It may be used as
the last choice for an incoming outside call. The Pool button LED provides the
status for the duration of the call only.
 A Loop button provides an appearance for incoming any outside call when a
direct Line appearance button is not available. The Loop button LED provides
the status for the duration of the call only.
 A Station User Program Code button, access or activate the special features
available with the Station User Program Codes, see section 5.26.
 An outside Line Appearance button provides access to the individual Line
assigned to the Flex button. The Line button LED provides the status of the
outside Line.
With the exception of Line buttons, you can be assign the feature or function of the button from
your iPECS IP or LDP Phone.. If allowed in the database, you can also assign or reassign Line
buttons.
Operation
iPECS IP & LDP Phones
To assign a Flex button at the station
1. Press the [TRANS/PGM] button.
2. Press the desired Flex button.
3. Dial the digits from the Flexible Numbering Plan.
4. Press the [HOLD/SAVE] button.
Or,
1. Press the [TRANS/PGM] button.