Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
327
The system will send calling and answering party identification in the appropriate messages to the
ISDN based on the database. Identification messages may be restricted, not reported, to the far-
end user. Calling Line Identification Restriction and Connected Line Identification Restriction may
be enabled in the system database or you may activate restrictions with a {CLIR} and {COLR}
Flex buttons.
Operation
System
Operation of this feature is automatic.
iPECS IP & LDP Phones
To program {CLIR} button,
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “81” + [HOLD/SAVE]
To program {COLR} button,
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “82” + [HOLD/SAVE]
To activate CLIR or COLR, before placing or answering an ISDN call
1. Press the {CLIR} or {COLR} Flex button.
Conditions
1. This feature may not be available in the specific ISDN service area or may be a
subscription service.
Programming
Keyset Admin.
To Next Page
Loading...
