Vertical summit 800 - 5.17 Prime Line Immediate;Delayed

Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
355
 One of DSS button or Unified-LOOP button is seized automatically for the
call.
- Seize DSS button and dial : the DSS button is seized.
- Seize Unified-LOOP button and dial.
 If there is DSS button, the DSS button is seized.
Or, the pressed Unified-LOOP button is seized.
5) Making of internal call.
- In idle state, if dial CO-access-code and external number by dial pad.
 One of CO-Individual/CO-Group/CO-LOOP/Unified-LOOP button is seized
automatically for the call.
- Seize CO-Individual/CO-Group/CO-LOOP button and dial : the CO-
Individual/CO-Group/CO-LOOP button is seized.
- Seize Unified-LOOP button and dial.
 If there is CO-Individual/CO-Group/CO-LOOP button, the CO-
Individual/CO-Group/CO-LOOP button is seized.
Or, the pressed Unified-LOOP button is seized.
6) Auto-hold and auto-transfer are implemented also using previous DSS/CO-
Individual/CO-Group/CO-LOOP/MSN-LOOP buttons.
- On internal/external talking state, the call is transferred to the right-next call of
making by pressing of CO-Individual/CO-Group/CO-LOOP/MSN-
LOOP/Unified-LOOP
Programming
Keyset Admin.
STATION
DID/DISA Wait (PGM 113-Button 9)
CO/IP LINE
ICLID Timer (PGM 142-Button 14)
SYSTEM
DID/DISA Destination (PGM 167)
DID/DISA No Answer Timer (PGM 181-Button 2)
Web Admin.
STATION DATA
CLI Attributes

DID DISA Wait/Show 2nd PSTN CLI
CO LINE DATA
Analog Attributes

ICLID Ring Timer
SYSTEM DATA DID/DISA Destination
System Timers

DID/DISA No Answer Timer
Related Features
 Direct Inward System Access (DISA)
 Direct Inward Dial (DID)
 ICLID Call Routing
 Intercom (ICM) Call
Hardware
 iPECS IP or LDP Phone