Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
32
To delete a recording
1. Press the [TRANS/PGM] button.
2. Dial “06”, the System Announcement Record code.
3. Dial the sequence number of the voice storage unit.
4. Dial the System Announcement number (“01”-“70”)
5. Dial language type (“1”~”6”), the current announcement is played followed by the “Press #
to record” prompt.
6. Press the [SPEED] button during playback to erase the announcement.
Conditions
1. Thresholds are assigned as total Calls-In-Queue to activate a Page alert and are
checked from lowest priority (CIQ #1) to highest priority (CIQ #3). Thus, the highest
priority CIQ defined should have the largest threshold and the lowest priority CIQ
should have the smallest threshold.
2. The System has seventy (70) announcements employed for Auto Attendant, ACD
groups, CCR, Page Alerts, etc. Two announcements are reserved for MOH and
multi-language support, announcements 71 and 72 respectively.
Programming
Keyset Admin.
STATION GROUPS ACD Group (PGM 191)
CIQ #1 Threshold (PGM 191, Button 24-6)
CIQ #1 Announcement Location (PGM 191-Button 24-7)
CIQ #1 Page Zone (PGM 191-Button 24-8)
CIQ #1 Announcement Delay Timer (PGM 191-Button 24-9)
CIQ #1 Announcement Repeat Timer (PGM 191-Button 24-10)
CIQ #2 Threshold (PGM 191-Button 24-11)
CIQ #2 Announcement Location (PGM 191-Button 24-12)
CIQ #2 Page Zone (PGM 191-Button 24-13)
CIQ #2 Announcement Delay Timer (PGM 191-Button 24-14)
CIQ #2 Announcement Repeat Timer (PGM 191-Button 24-15)
CIQ #3 Threshold (PGM 191-Button 24-16)
CIQ #3 Announcement Location (PGM 191-Button 24-17)
CIQ #3 Page Zone (PGM 191-Button 24-18)
CIQ #3 Announcement Delay Timer (PGM 191-Button 24-19)
CIQ #3 Announcement Repeat Timer (PGM 191-Button 24-20)
To Next Page
Loading...
