Vertical summit 800 - Page 68

Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
57
6. Replace the handset, return to idle.
To activate Call Forward, Remote (Follow-me)
1. Lift the handset or press [SPEAKER] button to receive dial-tone
2. Press the [FWD] button or Soft key,
3. Dial Call Forward code “0”,
4. Dial the station’s Authorization Code (Station number and password),
5. Dial the Forward condition (“1”~“4”),
6. Dial the destination station or station group,
Or, Dial an outside Line access code (“9”, “8xx”, “88xx”) and the desired external phone
number.
7. Press the [HOLD/SAVE] button to save.
Or, Press the [SPEED] button and dial the desired bin number
8. Replace the handset, return to idle.
To deactivate Call forward
1. Press flashing [FWD] button, Call Forward will deactivate and the [FWD] button LED is off.
Or, for an iPECS IP Phone,
1. Lift the handset or press the [SPEAKER] button to receive dial-tone,
2. Press the [FWD] Soft button, For the LIP-8002, the [DND] button is used to activate
Forward.
3. Press the # dial pad button.
SLT
To activate Call Forward,(Unconditional, Busy, No Answer, or Busy/No Answer)
1. Lift the handset to receive dial tone.
2. Dial the Call Forward feature dial code “554”
3. Dial desired Call Forward code (“1”~“4”).
4. Dial the destination station, station group, or dial CO access code (9, 8xx, 88xx) and
desired external phone number.
5. Momentarily press the hook-switch and receive confirmation tone.
6. Replace the handset to return to idle.
To activate Call Forward to a Speed number
1. Lift the handset to receive dial tone.
2. Dial the Call Forward feature dial code “554”.
3. Dial the Call Forward code (“6”~“9”),
4. Dial the Speed Dial bin number.
5. Replace handset to return to idle.
To activate Call Forward, Remote (Follow-me)
1. Lift the handset to receive dial tone.