Summit & Summit 800
Feature Description and Operation Manual Issue 1.2
80
3. Dial the Conference Room number (1~9)
4. Dial the Conference Room password.
5. Press [HOLD/SAVE] to delete the Conference Room.
To transfer an active call to a Conference Room
1. Press the [TRANS/PGM] button.
2. Dial “59”, the Conference Room entry code.
3. Dial the Conference Room Number.
4. Dial the Conference Room password.
5. Hang-up to complete the transfer.
SLT
To open a Conference Room
1. Lift the handset.
2. Dial “561”, SLT Programming code.
3. Dial “53”, the Create Conference Room code.
4. Dial the desired Conference Room number (“1”~”9”).
5. Dial the Conference Room password.
6. Momentarily press the hook-switch.
To join a Conference Room
1. Lift the handset.
2. Dial “59”, the Conference Room entry code.
3. Dial the Conference Room Number.
4. Dial the Conference Room password.
To close a Conference Room
1. Lift the handset.
2. Dial “561”, SLT Programming code.
3. Dial “54”, the close Conference Room code.
4. Dial the Conference Room number (“1”~”9”).
5. Dial the Conference Room password.
6. Momentarily press the hook-switch, receive confirmation tone.
Conditions
1. Once established, a Conference Room will remain opened until the Room is closed.
2. iPECS UCS Client Soft phones may also create, delete and join a Conference Room.
For operation, refer to the iPECS UCS Client User Guide.
Programming
Related Features
Multi-Party Conference
Automatic Speaker Select
To Next Page
Loading...
