VESDA
®
LaserPLUS Product Guide
21
The LaserPLUS detector is shipped with the VESDAnet A and B terminals looped. If the detector
is not to be networked with other devices, then do not disturb this loop. Remove this loop to
connect the detector to the VESDAnet.
Figure 17 - Stand-alone VESDAnet connection
Figure 18 - An example of the wire connection for VESDAnet (closed loop for
illustrative purposes only)
Connections for GPI
Figure 19 - Wire connection details (GPI)
11
10
GPI -
GPI+
- 0V
+ 24 VDC
To Next Page
Loading...
