Vespa LX 2012 User Manual

- Now, remove the two spacers (parts 17 and 16)
and, once the space between the NADELLAs -
steering tube and swinging hub - has been fully
filled with grease, move the dust gaiter rings until
they are placed in that space.
- By wedging the washers as described above, the
front suspension unit refitting stage is finished.
Recommended products
AGIP GREASE MU3 Yellow-brown, lithium-
base, medium-fibre multipurpose grease.
ISO L-X-BCHA 3 - DIN 51 825 K3K -20
Refitting
CAUTION
USE NEW ROLLER CASINGS, PIN, SEALING RINGS AND DUST GUARDS FOR REFITTING.
Suspensions Vespa LX - S 125 3V ie 150 3V ie (2012)
SUSP - 214

Vespa LX 2012 Specifications

General

Engine Type	Single-cylinder, 4-stroke
Displacement	124 cc
Cooling System	Air-cooled
Fuel System	Carburetor
Transmission	Automatic CVT
Fuel Tank Capacity	8.6 liters
Seat Height	785 mm
Curb Weight	114 kg
Length	1, 770 mm
Width	705 mm
Height	1, 140 mm
Max Power	10.3 hp @ 7, 750 rpm
Front Suspension	Single arm with coil spring and hydraulic shock absorber
Front Brake	200 mm
Rear Suspension	Coil spring and hydraulic shock absorber
Rear Brake	110 mm drum