Vespa LX 2012 User Manual

- Keep the brake pads in contact with the pistons
and insert the calliper in the brake disc.
- Fix the calliper to the mounting bracket with the
two screws with spring washer to the prescribed
torque
- If it is disconnected, fasten the brake pipe joint to the calliper and tighten to the prescribed torque
- Purge the circuit and refit the front wheel
Locking torques (N*m)
Brake calliper mounting clamping 20 to 25 Nm Brake pipe connection 20 to 25 N•m
Front brake disc
Vespa LX - S 125 3V ie 150 3V ie (2012) Braking system
BRAK SYS - 229

Vespa LX 2012 Specifications

General

Engine Type	Single-cylinder, 4-stroke
Displacement	124 cc
Cooling System	Air-cooled
Fuel System	Carburetor
Transmission	Automatic CVT
Fuel Tank Capacity	8.6 liters
Seat Height	785 mm
Curb Weight	114 kg
Length	1, 770 mm
Width	705 mm
Height	1, 140 mm
Max Power	10.3 hp @ 7, 750 rpm
Front Suspension	Single arm with coil spring and hydraulic shock absorber
Front Brake	200 mm
Rear Suspension	Coil spring and hydraulic shock absorber
Rear Brake	110 mm drum