Vespa LX Series - Engine removal from vehicle

Removal of the engine from the vehicle
CAUTION
SUPPORT THE VEHICLE ADEQUATELY.
- Disconnect the battery.
- Remove the side fairings and footrest left and
right terminals.
- Remove the helmet compartment.
- Remove the full muffler unit.
- Remove the 3 screws of the rear brake transmis-
sion retainer brackets indicated in the picture.
- Disconnect the rear brake transmission by un-
screwing the adjuster screw.
- Disconnect the belt cooling pipe and the swinging
arm retaining spring shown in the picture.
- Disconnect the ground lead (1) from the engine.
- Disconnect the spark plug tube.
- Loosen the clamp indicated in the picture and
disconnect the sleeve connecting the air filter to
the throttle body.
Engine from vehicle Vespa LX 125 - 150 i.e.
ENG VE - 88