About the machine
20
Machine specifi-
cation
* High skids are available as extra equipment.
→ »Stubble height« page 38
→ »Optional equipment« page 84
Tractor require-
ments
Tractor weight and size
The tractor must have a proper weight. Local legislation governing this
ratio must be observed.
The correct ratio between tractor and machine ensures correct
braking functions and manoeuvrability.
An incorrect ratio between tractor and machine can be dangerous.
To get good clearance underneath the machine when it is lifted with
the tractor's three-point hitch, the lift arms should be able to be raised
at least 510 mm (20
1
/
16
”) above the ground.
→ »Adjusting the working height« page 29
Unit 117 122 124
Net weight
kg 388 430 450
lb 856 948 992
PTO Power take off RPM 540
Power requirement, minimum
kW 26 30 33
HP 36 42 46
PTO shaft with freewheel Standard
Number of cutting discs parts 4 6
Number of knives parts 12 18
RPM, cutting discs RPM 3000
Stubble height
mm 20-50*
in
3
/4”-2”*
Cutting width
m1.652.02.4
ft in 5' 5½” 6' 6½” 7’ 10½”
Hydraulic pressure
bar 180
Psi 2610
Noise level dB(A) 85
Cutting speed
kph 6 - 15
mph 3.7 - 9.3
Transport width
mm 1200
ft in 3' 11''
To Next Page
Loading...
