Preparation
21
Preparation
Preparing the
machine
The machine is divided into its main components for transport to the
user. The machine must be assembled in accordance with the specific
assembly instructions delivered with each machine.
Initial connection of the machine
Exercise caution when a new machine is connected for the first time.
Make sure that all safety instructions are complied with.
Following the safety instructions will increase your personal safety.
Failure to follow the safety instructions may result in serious injuries
and accidents.
Crane lifting safety
Only use approved lifting equipment
Only use approved lifting equipment which is correctly fastened to the
machine.
This will increase your personal safety.
Failure to follow the safety instructions may result in serious injuries or
accidents.
Unladen weight of the machine:
»Machine specification« page 20
The following chapter is for initial assembly and shortening of the PTO
shaft, etc. When assembling after, only certain attachment points
should be carried out.
33.502.000
To Next Page
Loading...
