Cleaning
43
Cleaning
Before cleaning
Higher risk when cleaning the equipment
When cleaning, there is an increased risk of injury.
Attention when carrying out cleaning work protects your own and
others safety.
Failure to follow the safety instructions may result in serious injuries.
Therefore, do the following before cleaning:
• Check the area around the machine.
• Disconnect the P.T.O shaft.
• Take the pressure off the hydraulic system and disconnect it from
the tractor.
• Activate the hand brake and stop the tractor.
• Remove the ignition key from the tractor.
Disconnect the power when cleaning the machine
Always disconnect the power before you start cleaning the machine.
This will prevent short circuits and damage to the electric circuit.
There is a risk of burns and other serious injuries if the electrical
systems short circuit.
Protect your body and face when cleaning the machine
Wear the correct protective gear for body and face when cleaning the
machine.
This will protect your body and face from dirt and oil splashes.
Insufficient protection of body and face can lead to severe skin and
eye injuries.
Before starting to clean the machine do the following:
• Open the guard around the cutting unit.
• Remove all loose material from the machine.
To Next Page
Loading...
