Vicon Extra 124 - Filling New Oil into Transmission

Maintenance
74
 Use a suitable tool to remove the oilplug.
 Let the oil flow into a suitable container.
 Allow the last of the oil to drip out of the transmission for approx.
10 - 15 minutes.
 Lower the machine back down to the working position.
 Remove oilplug 2.
 Fill up with new oil until it oil level reaches the hole for oilplug 1.
 Fit oilplug 1 and 2.
Oilplug
Oilplug 1
Oilplug 2