Victoria Arduino BLACK EAGLE VA388 User Manual

10.3 CUP WARMER
ADJUSTMENT
The machine is equipped with a cup warmer with
a temperature probe. The machine can work in
timed mode or thermo-controlled mode.
Use the rotary switch to select the heater for off-
set adjustment and press it to proceed.
NOTE
Usually, the coffee boiler offset must not be
adjusted.
To pass from a mode to the other, stay in the
programming mode of the cup warmer and keep
the key
pressed for at least 5. Select the
required option using the rotary switch:
t 4JOHMF DPOUSPMMFE UIF UFNQFSBUVSF DBO CF
set).
t 4JOHMFUJNFE
t %PVCMF UJNFE XIFO JU JT SFRVJSFE UP JOTUBMM
another cup warmer).
10.4 MAINTENANCE ALARM
This page permits to modify the delivery number
or the date above which the maintenance alarm
is activated.
The modification of these fields is made in the
same way as the one used in the menu.
To make the new settings effective, it is also
necessary to reset the inner counter of cycle for
zeroing the cycle number.
Edition 01 of 08/2017
10.3
SERVICE MANUAL
Menu PrincipaleBoiler setpoint
Boiler offset
1.0
1.0 1.0
3
3
Fig. 340
Cup warmer type
Single controller
Menu PrincipaleCup warmer
Cup warmer t
ype
S
Fig. 342
Manual Timed
M
anua
l
T
imed
l
T
Menu PrincipaleCup warmer
Fig. 341
Menu Principale
10 December 2016
100000
Fig. 343

Victoria Arduino BLACK EAGLE VA388 Specifications

General

Brand	Victoria Arduino
Model	BLACK EAGLE VA388
Category	Coffee Maker
Language	English