1 remove the work surface raising and remov-
ing the water collection pan.
2 Partially unscrew the 2 side screws that hold
the front panel in place.
3.3 REMOVAL OF THE FRONT,
LOWER PANEL
To remove the lower front panel, it is necessary to:
REAR PANEL
To remove the back panel:
1 remove both side panels;
2 loosen the 3 screws found on the top.
NOTE
During reassembly, first insert the rear panel
then the side panels to avoid damaging them.
Fig. 65
3 Carefully remove the panel.
Edition 01 of 08/2017
3.4
SERVICE MANUAL
Fig. 66
Fig. 68
Fig. 67
To Next Page
Loading...
