10.6 PASSWORD SETTING
This page is used to enter the login password,
when it is required and enabled.
The password may consist of 4 numbers from 0
to 9 in any combination.
The password length may be included between
0 (password disabled or invalid, characterized by
horizontal lines) and 4 digits; therefore, even a
password of 2 digits is valid.
This happens by pressing and holding the button
for a few seconds.
Once having carried out the modifications or hav-
ing cancelled the maintenance counter, switch
the machine off and then on again.
10.5 ALARM HISTORY RESET
Access the ALARMS menu and select ALARM
HISTORY.
Keep the key
pressed to cancel all saved
errors.
NOTE
Is important to reset the error log to avoid
paying attention to problems already solved.
Edition 01 of 08/2017
10.4
SERVICE MANUAL
Menu Principale
10 December 2016
RESET MAINTENANCE
100000
Fig. 344
Cup warmer probe 1 error
Error found
Pressure error
Group dose error 1
Group dose error 1
Group dose error 2
Fig. 346
Menu Principale
Alarms
history
Washing
allarm
Alarms
Alar
histor
ashin
lla
Fig. 345
Technical settings
Date and time Information
Automatic
wash. Cycle
Update
firmware
Maintenance
Password
setting
Auto
wash
ssword
ttin
i
cl
s
war
ir
aintenanc
Fig. 347