Once having entered and confirmed the pass-
word, an information page will show the result of
the comparison between the entered password
and the one previously set.
To enter the pages inside the various menus,
when the password is unknown, the passe-
partout password may be used. The value of this
password is 1 9 0 5 and it is asked when access-
ing any page.
CHANGE OF PASSWORD
This page, which is contained in the technical
settings menu, permits to change the password.
It is necessary to first confirm the password set
(for safety reasons), if the password management
is enabled.
Once having entered and confirmed the pass-
word, an information page will show the result of
the comparison between the entered password
and the one previously set. Subsequently, the
new password to be set will be requested.
PASSWORD UNLOCK PAGE
In case the user forgets the password set, an
unlock code can be used to enter in the hidden
page of password unlock.
To access the password unlock page, access the
password request page and press the key
for approx. 10 secs.
A message indicating the entering of the unlock
code will be shown. The unlock code to be
inserted is the following: 1 9 3 6.
An information page will shown the procedure
result. If the entered code is correct, the access
to the menu pages by means of the password
will be disabled and the previously entered pass-
word will be cancelled.
Edition 01 of 08/2017
10.5
SERVICE MANUAL
Enter new password
Technical settings
Fig. 348
Enter password
Technical settings
Fig. 350
Enter old password
Technical settings
Fig. 349
Enter password
UNLOCK PASSWORD
Technical settings
Fig. 351