4 Once you see that there is no more steam
and pressure in the boiler, lift the lid on the
exhaust manifold.
3 Turn off the water inlet to the pump.
5 With a No. 17 key unscrew the bolt inside
the drain water manifold.
6 Let the water flow out completely.
NOTE
When turned on again the self-filling function
will load water for 90 seconds. If a level error
message is show, turn the machine off and on
again using the main switch.
Edition 01 of 08/2017
5.3
SERVICE MANUAL
Fig. 114
Fig. 113
Fig. 115
To Next Page
Loading...
