VIDAR DiagnosticPro Advantage - Where to Go from here

41
Where to go from here...
How y
ou proceed depends on how you will be connecting the digitizer to
your com
puter:
If the digitizer will be connected via a
SCSI interface, continue th
e
installation using the foll
owing sequence of sections in this ma
nual:


“VIDAR Drivers and Toolkit CD and Driver Information”
 “SCSI Settings”
 “Installing SCSI hardware”
 “Installing SCSI Drivers”
 “Updating the VIDAR Toolkit”
 “Operating C
ADPRO™ Advantage”
If the digitizer will be connected via a USB interface, continue the
installation using the following sequence of sections in this m
anual:


“VIDAR Drivers and Toolkit CD and Driver Information”
 “Installing USB Drivers”
 “Updating the VIDAR Toolkit”
 “Operating C
ADPRO™ Advantage”
VIDAR CADPRO Advantage Installation Guide