32
5. Identify the components
Item
Digitizer base
Exit tray
50 sheet film feeder or 100
sheet film feeder
Power cord: 115V (p/n 4043-001) or 230V
(p/n 2104-006)
Important Safety Information card (on film feeder)
Quick setup card
Digitizer base Exit tray
or
50 sheet feeder or 100 sheet feeder
Other items* (see footnote)
Adaptec 2930 SCSI kit (p/n 3053) and
SCSI cable: 6 foot MMD-50 to SCSI
III 68-pin male (p/n 4270)
USB cable: 6 foot (p/n 4618)
*You will receive either a SCSI kit and SCSI cable or a USB cable, as specified at
time of order.
VIDAR CADPRO Advantage Installation Guide
To Next Page
Loading...
