Videx GSM4K/4G - The GSM Mobile Apps; VIDEX SMS ACCESS, SMS WIZARD & SMS WIZARD PRO; WHERE TO DOWNLOAD THE MOBILE APPS AND GETTING STARTED

66250754-4G-EN - V2.0 - 28/03/22
- 67 -
4000 Series GSM Audio Intercom - Technical Manual
4000 Series GSM Audio Intercom with Proximity
The GSM Mobile Apps
VIDEX SMS ACCESS, SMS WIZARD & SMS WIZARD PRO
In addition to programming by direct text messages or
using the GSMSK PC programming software it is also
possible to program the GSM intercom using the GSM
mobile apps: Videx SMS Access (for users), Videx SMS
Wizard (for administrators) and Videx SMS Wizard PRO
(for installers and engineers).
The mobile apps can be used to simplify the programming of the GSM intercom using SMS messages. The SMS wizards generate
the text message required to communicate with the GSM intercom. Depending on the model of the GSM (GSM PRO, 4G GSM,
Digital GSM, GSM Lite, GSMVRK and 2270 GSM module) text messages can be generated to program features such as access codes,
proximity access fobs/cards, dial to open (DTO) telephone numbers, assign pre-existing access levels, free access periods and call
button/apartment telephone numbers.
Other features are also included to simplify the programming setup process. Additionally it is also possible for users to control their
gate or door via the dial to open (DTO) or text message features.
WHERE TO DOWNLOAD THE MOBILE APPS AND GETTING STARTED
The GSM mobile apps are available for both Android smart devices (mobile smartphones and tablets) and also Apple iOS (iPhones
and iPads) and can be downloaded for free from the Google Play Store (for Android devices) and the App Store (for iOS devices).
Before using mobile apps, the following details will be required for initial setup:
• Model of the GSM intercom module - e.g. Art.4810/4G (4G GSM), Art.4812 or Art.4812R (Digital GSM) etc.
• Firmware level of the GSM intercom - e.g. for the Art.4810/4G GSM the rmware might be 4K1.2.3 (the current
rmware version of the GSM module can usually be found on the label on the back of the GSM intercom or by sending
the text message 1111VER? to obtain the rmware version, also refer to notes on page 44).
• Telephone number of the GSM intercom - i.e. the mobile number of the SIM card being used in the GSM module.
• Master code of the GSM intercom - i.e. the 4 digit code used for programming, by default this is set to '1111'. In the
event that this code has been forgotten or lost please refer to 'change the 4 digit master code (CDE)' notes on page 45
or 'resetting the master code to 1111' notes on page 34 to reset the code back to factory default if required.
If the SMS Access or SMS Wizard app is downloaded and installed
it is recommended that you rst tap on the help icon
?
in the
top right corner of the app's homescreen and then follow the 'TO
GET STARTED' quick guide.
If the SMS Wizard PRO app is downloaded and installed it is
recommended that you rst tap on the menu icon
in the top
right corner of the app's homescreen and then tap on the hint/
help icon
?
from the drop down menu and then follow the 'TO
GET STARTED' quick guide.
It should be noted when navigating between the apps dierent
programming screens the hint/help icon
?
(either located in the
top right corner of each screen or located in the drop down menu
on each screen) can be used to oer additional guidance on how
to use the current programming screen, Fig.85.
Fig. 85
SMS ACCESS, SMS WIZARD AND SMS WIZARD PRO APP COMPATIBILITY
The GSM mobile apps are all compatible with the latest GSM intercoms and modules available. They are also compatible with the
older Art.4810N GSM PRO models from rmware version 1.0.4 onwards.