ViewSonic SC-T46 - Page 112

Conguring Client Settings
Conguring Service Access Settings
101
101
NOTE
• The red asterisks indicate the required elds.
• The remote service-hosted computer can be a physical server or a virtual machine.
Please visit Microsoft’s websites at www.microsoft.com or support.microsoft.com for
more information.
• SC-T46 supports up to two Remote Desktop sessions at the same time.
• Windows® RemoteFX™ is the technology that oers a rich user experience over a
network for remote desktop users.
NOTE
• To create an entry of RDP connection settings for MultiPoint™ Remote Desktop
sessions, please do the following:
1. In the Server Settings section, click
to start discovering MultiPoint™
Server systems over your network.
2. In the opened window, click the drop-down menu to select the desired
server, and then click OK to conrm.
3. The name and IP address of the selected server will be lled out in the
corresponding elds automatically.
• The default session name will be the name of the selected MultiPoint host server,
but you still can change the default.
• Windows® MultiPoint™ Server is a shared resource technology. This Windows-based
operating system enables a host server to power multiple and independent stations,
allowing users to share the computing power of one single server.
5. Click Save to add this RDP connection entry.
6. The shortcuts for Remote Desktop services are automatically created on the local desktop and START menu.
NOTE
• Depending on your plan of service delivery and the conguration of your server(s),
you may need to congure other advanced RDP connection settings for service
access. For more information on other available settings, please refer to section
“4.6.5 Conguring Advanced RDP Connection Settings” on page 114.