ViewSonic SC-T46 - Positioning Your SC-T46

Setting Up Your SC-T46
Positioning Your SC-T46
9
9
2.1 Positioning Your SC-T46
There are two ways to position your SC-T46:
• Put it (with its stand) on a desk or a desired place uprightly.
• Mount it on the back of a monitor using a VESA mount kit.
To mount your SC-T46 on the back of a monitor, please follow the steps below:
Step 1: Remove the Stand from Your SC-T46
Step 2: Understand Your Stand / VESA Mount Kit for SC-T46
Step 3: Store Away Screws inside the Bracket
Step 4: Remove Screws from the Bracket
Step 5: Mount Your SC-T46
NOTE
• If your SC-T46 uses a non-standard stand with the wireless module, you will need
a dierent VESA bracket to mount it on the back of the monitor. For details, please
refer to topic “Mounting with Another VESA Bracket (SC-T46)” on page 13.
Step 1: Remove the Stand from Your SC-T46
To remove the stand from your SC-T46, please do the following:
1. Place your SC-T46 on a at surface with the stand side upward.
2. Remove the screw that xes the stand to your SC-T46.
3. Store away the removed screw inside the stand. Detailed instructions will be
provided in Step 2 and 3.
NOTE
• It’s highly recommended to store screws away inside the stand when not needed
to prevent them getting lost.
台灣製造 / 台湾制造 / Made in Taiwan
JPAA
Manufacturer
:
Atrust Computer Corp.
製造商:冠信電腦股份有限公司 制造商
:
冠信电脑股份有限公司
Model Name
:
Thin Client 產品名稱
:
精簡型電腦 产品名称
:
精致型电脑
Model / 型號 / 型号 : Atrust t62
Input/輸入 / 输入
:
+5V 3A