Setting Up Your SC-T46
Assembling the AC Adapter
14
14
2.2 Assembling the AC Adapter
To assemble the AC adapter for your SC-T46, please do the following:
1. Unpack your thin client package and take out the AC adapter
and its detached AC power cord.
2. Press the female end of the power cord into the male
connector of the AC adapter.
NOTE
• The plug of the supplied power cord may vary with your area.
2.3 Getting Connected
To make connections for your SC-T46, please do the following:
1. Connect your SC-T46 to your local network with an Ethernet cable.
2. Connect a keyboard and mouse to your SC-T46 with USB ports.
3. Connect and turn on the monitor(s).
4. Connect your SC-T46 to a power outlet using the AC adapter included in the package.
NOTE
• For detailed instructions on how to assemble the supplied AC adapter, please refer
to section “2.2 Assembling the AC Adapter” on page 14.
5. Connect other peripherals for your SC-T46 if needed.
To Next Page
Loading...
