ViewSonic SC-T46 - Adding a Local Printer

Conguring Client Settings
Conguring External Device Settings
73
73
4.4.6 Adding a Local Printer
To add a local printer for your SC-T46, please do the following:
1. Connect the desired printer to your SC-T46 and turn on the printer.
2. On ViewSonic Client Setup, click Devices > Printer.
3. Click Add on the top of the Printer list.
4. The system automatically start searching for available local printers.
5. Upon completion, the discovered local printers will be listed on the Printer Port drop-down menu.
6. Click the Printer Port drop-down menu to select the desired local printer.
7. Fields in the Add Printer section will automatically change to t the type of the selected printer.